Home > Knowledge > Content
The mistakes of maintain the cultivator
- Sep 07, 2017 -

Pastoral management is more comprehensive, supporting the agricultural machinery, the characteristics of low noise, low emission, strong power and strong adaptability, we in the daily maintenance of pastoral management tillage machine, scientific and reasonable, to avoid entering the Tang Wanghe function of micro tillage machine under these maintenance errors rig good reliability.

1, multi field management machine is equipped with Aluminum Alloy tank engine, Aluminum Alloy is clearly less than the hardness of nodular cast iron in the body, so all the screws must be in accordance with the prescribed torque force, especially mistsprayer cylinder head screws, little attention will be drawing "". Not in the tillage machine engine through screws.

2, fuel tank cover oil leakage sealed with film paper. After sealing the fuel tank, a long time work in the tank produces negative pressure, resulting in insufficient oil, black smoke at work, lack of power.

3, do not pay attention to the quality of the fuel oil and lubricating oil, not only makes the machine power Dandong plow enough, but also accelerated the rotary wear; lubricating oil will directly influence the machine, careless enough to do. 4, cooling water cooling. Some people see the air cooler temperature will be higher, worried about damage to the machine, with water to help cool down. Is actually very wrong, sudden cooling water, the cylinder suddenly shrink, easily broken ring, cylinder, cylinder and even rupture.

5 、 dismantle the wind shield and windshield of the air cooler. Some machine hand I do not know the wind guide cover and a windshield, that is something to stop the earth, large transport ditching machine did not pay attention to, can not arbitrarily remove, causing the fan to concentrate, lost the cooling effect. 6, diesel atomization is bad, only change nozzle. The diesel oil atomization is bad, except the oil nozzle problem, the multifunctional micro tillage machine high-pressure oil pump is worn with little pressure and little oil.

7, do not pay attention to maintenance. Some think a few days to get a hand machine maintenance on the line, in fact, is the process of the wear properties of the class days and months multiplying, maintenance of a furrowing machine.

8 、 improper use of sealant for engine eccentric gasket. The partial cover mat enables the cereal field management machine to use the sealant, and the remaining glue easily enters the gear box suction, and the sealant is easy to plug the oil into the oil hole, so that the crankshaft is not effectively lubricated.