Home > Knowledge > Content
The solution furrowing cultivator tiller out of gear
- Sep 16, 2017 -

Furrowing machine cultivator to replace a reverse gear and a coulter transmission after the occurrence of furrowing machine automatic off gear case, after the examination and analysis, the reason is the maintenance assembly after accidentally leak, coulter gear washer, coulter gear axial clearance is too large and fibrillation, that rotary automatic tripping. Re install the washer, out here we introduce the solution of furrowing machine features no longer happen. Furrowing machine hanging rotary gear operation, only the furrowing machine to press the joystick left hanging files, check the reason is by positioning the ball spring engagement suite transmission shaft of the colter device is useless, the ball has been lost, or spring is stuck, the engaging sleeve cannot be locked in the colter shaft, slipping and can not transfer power. Repair or change the ball spring positioning device, the fault is excluded. Furrowing machine rotary tillage furrowing machine, the left shifting gear coulter, hard gear and automatic off gear shortly after inspection, the reason is Coulter lever has the bending deformation, the colter shaft gear sets jaw and a coulter gear not jaw engaging, or length of engagement is very small, and the axial lever vibration work out. After straightening the joystick, the fault is eliminated. Coulter lever bending deformation is mainly caused by improper operation. When the gear is hung, the control lever can not be hard to dial. If the gear is difficult, the clutch can be lightly engaged, so that the sleeve can be rotated in one position, and then the lever can be moved.