Home > News > Content
China Micro Tillage Machine Factory Tutor You Out Of The Micro Tillage Machine Maintenance Errors
- Oct 18, 2017 -

1. Water cooling of micro cultivator air cooler. Some hands see the air cooler temperature higher, worried about damage to the machine, with water to help cool down. Is actually very wrong, sudden cooling water, the cylinder suddenly shrink, easily broken ring, cylinder, cylinder and even rupture. 2, do not pay attention to class maintenance. Some hands think that a few days to do a maintenance on the line, in fact, wear and tear is a process of accumulation, class maintenance is the same as the main.                                                                 3, do not pay attention to the quality of the fuel oil and lubricating oil. Poor fuel quality, not only make the power of the machine is not enough, but also accelerated the wear of the oil pump and core; lubricating oil quality directly affects the starting performance and service life of the machine, must not be careless. Yichang Yao Wan Xiang Shahe Cun Lu Qibing to reflect his machine has been used very well, because there is a lack of operation of lubricating oil, plus a renewable oil, the machine performance declined, finally after overhaul to solve the problem.               4. Improper use of sealant for engine pad of micro tillage machine. Partial cover pad using the sealant, the excess glue easily into the gear box, because of long time working and suction pump, it is easy to plug the oil into the oil sealing hole, so that the crankshaft and connecting rod without effective lubrication.                                                    5, fuel tank cap oil film sealed paper. After sealing the fuel tank, a long time work in the tank produces negative pressure, resulting in insufficient oil intake, making the machine black smoke at work, lack of power.                                                      6 diesel atomization nozzle change. The problem of poor atomization of diesel fuel is mainly caused by the wear of high-pressure oil pump, small pressure and low oil content.                   7, chaos on the body of the screw tight. Micro tillage machine is equipped with multi Aluminum Alloy box engine, Aluminum Alloy is clearly less than the hardness of nodular cast iron in the body, so all the screws must be in accordance with the prescribed torque force, especially the cylinder head screws, little attention will be drawing "". And try not to screw tight in a heat engine.          8, indiscriminate demolition air-cooled machine guide hood and windshield. Some hands do not know the role of the wind shield and the wind deflector, think it is dirt things, you can not, arbitrary disassembly, resulting in the fan wind can not concentrate, lost the cooling effect.