One of the ways to improve the service life of diesel generator sets is to establish good operation (maintenance) procedures.

When the diesel generator is installed, the next step is to check, and the next one is to run. The following checks must be made before each startup.

Remove foreign matter in the surface or surrounding environment of the generator unit and remove the surrounding environmental factors that may interfere with the operation of the diesel generator set.

The air inlet and vent of the diesel generator set must be kept unobstructed.

Keep the antifreeze liquid level normal

Keep air filter and heater working properly

The lubricant level is within the specified range

The fuel valve is switched on and the fuel is supplied to the engine

The battery cable is properly connected to the battery so that the battery starts the unit and maintains normal charge of the battery.

We should cut off the device / circuit breaker of generator on the air switch before starting the unit after the start, check the load equipment ready for open / close to the generator on the air switch to load power generating units, can not directly load at startup.